Loading ...
Loading ...
Loading ...
Functions
POWER
Press the POWER button to turn the unit ON or OFF.
FUNCTION
Press the FUNC button to select between COOL, or DRY modes.
COOLING MODE
1. The exhaust hose needs to be installed for this mode.
2. To set this mode, press the FUNC button until the COOL indicator light
illuminates on the control panel.
3. Set the target temperature between 17-30°C by pressing the increase (+) or
decrease (-) buttons until the desired temperature is displayed on the LED
display.
TIP: The most suitable temperature setting for a room during summer is 24°C.
DRY (DEHUM) MODE
1. The exhaust hose & rubber cap needs to be removed for this mode, and a drain
hose (not supplied) should be attached to the drainage hole.
2. To set this mode, press the FUNC button until the DRY indicator light illuminates
on the control panel.
3. The fan speed is selected automatically by the unit and cannot be changed.
NOTE: Keep windows and doors closed for the best dehumidifying eect.
TEMP+ / TEMP-
Press the TEMP+ button to increase the set temperature or press the TEMP- button
to decrease the set temperature. The temperature can be set between 17-30°C.
NOTE: The time taken to reach the set temperature will depend on the environment
and the size of the space in which the unit is operating in. For example, if the
ambient temperature is too hot or the room is too large, the rate at which the
temperature descends will be slow as the cooling may be less eective.
FAN SPEED
1. The exhaust hose needs to be removed for this mode.
2. Press the SPEED button to select either LOW, MEDIUM, HIGH or AUTO fan
speeds. If AUTO fan speed is selected, the unit operates at maximum capacity
and HIGH fan speed while the room temperature is more than 2°C from the set
temperature. When the room temperature is within 2°C of the set temperature,
the unit operates at MEDIUM fan speed. Once the room temperature reaches the
set temperature, the unit will operate at LOW fan speed to eciently maintain the
desired temperature.
3. When HIGH, MEDIUM or LOW speed is selected, the unit operates at maximum
capacity until the set temperature is reached. The fan operates at the selected
speed.
11
Loading ...
Loading ...
Loading ...