Loading ...
Loading ...
Loading ...
Symptom Cause Correction
Some channels are • Those channels were deleted with the ,, Use CH. ADD/DEE to restore channels.
skipped over when CH. ADD/DEL option. See "Channel Selection" on page 16.
using CH/TRK (+/-)
Picture and sound of • Antenna or cables are loose. ,, Tighten connections or replace cable.
broadcasting channel
are weak or missing. • Wrong TUNING BAND option is being ,, Try all TUNING BAND options. See
used. "Channel Selection" on page 16 for
details.
Camcorder image is not • Camcorder is off. ,, Turn camcorder on and operate
shown, properly.
Camcorder image via • DVD+VCR SOURCE SELECT is not set ,, Press INPUT SELECT to select LINE
A/V inputto DVD+VCR to LINE1 or LINE2. input channel (LINE1 or LINE2).
is not shown on TV
screen.
Timer recording is not • Clock in DVD+VCR is not set to correct ,, Set clock to correct time. See "Setting
possible, time. the Clock" on page 17.
• Timer has been programmed ,, Reprogram Timer. See "Timer
incorrectly. Recording" on page 24.
• TIMER indicator does not appear after ,, Reprogram Timer
programming timer.
TIMER indicator • DVD+VCR is in Timer Recording mode. ,, This isthe normal indication that the
appears after DVD+VCR DVD+VCR is in TIMER mode.
is turned off.
Stereo Audio Record • TV is not Stereo-compatible. ,, No action is possible.
and/or Playback is not
present. • Broadcast program is not in stereo for- ,, No action is possible.
mat.
• DVD+VCR A/V Out jacks are not con- ,, Make A/V connections. Stereo is
nected to TV A/V in jacks, available only via A/V output from
DVD+VCR.
• DVD+VCR Audio/Video Out is not ,, Select AUX or A/V source as TV input.
selected for viewing at the TV.
• DVD+VCR BROADCAST TYPE mode is ,, Set BROADCAST TYPE mode to
set to SAP or MONO. STEREO. See "Setting the VCR Setup
Menu" on page 16.
Moisture Condensation
Moisture condensation can occur: In locations where moisture condensation may occur:
• When the DVD+VCR is moved from a cold place to a • Keep the DVD+VCR plugged intoan AC power outlet
warm place, with POWER On. This will help prevent condensation.
• Under extremely humid conditions. • When condensation has occurred, wait a few hours
for the DVD+VCR to dry before using it.
1-43
Loading ...
Loading ...
Loading ...