Loading ...
Loading ...
Loading ...
Basic TV Connections
• Make one of the following connections, depending on
the capabilities of your existing equipment.
RF coaxial connection
Connect the REOUT jack on the DVD+VCR to the
antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied (R).
_Note
If you use this connection, tune the TV to the
DVD+VCR's RF output channel (CH 3 or 4).
How to set the DVD+VCR's RF output channel
1.When the DVD+VCR is turned off, press and hold
CHANNEL A or CHANNEL V on the front panel for
about five seconds.
It will turn itself on and "RF 03" or "RF 04" appears in the
display window.
2. Press CHANNEL _ or CHANNEL T on the front
panel or CH/TRK (+/-) on the remote control to
change the RF output channel (CH 03 or CH 04).
3.Tum off and on the DVD+VCR.
4.Press the TV CH to 3 or 4 depending on the RF
output channel you had selected.
Now you can watch the DVD+VCR playback on CH3
or CH4 of your TV.
Audio/Video connection
_ Connect the DVD/VHS VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using the
video cable supplied (V).
Connect the Left and Right DVD/VHS AUDIO OUT
jacks on the DVD+VCR to the audio left/right in
jacks on the TV (A1) using the supplied audio
cables.
_Note
If you use this connection, set the TV's source selector
to VIDEO.
Rear of TV
Rear of DVD+VCR
1-14
Loading ...
Loading ...
Loading ...