Kenmore 59651673100 26" side-by-side refrigerator

User Manual - Page 24

For 59651673100.

PDF File Manual, 78 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Troubleshooting
ICE &
TOPIC POSSIBLE CAUSE SOLUTION
Sears recommends using copper tubing for installation.
Piastic tubing was used to complete water Piastic is less durable and can cause _eakage. Sears is
connection, not responsible for property damage due to improper
installation or water connection.
Unit is leaking water Check water connection procedure written in "Installing
Your Refrigerator". Self-piercing and 3/_,, saddle valves
Improper water valve was installed, cause low water pressure and may cIog the Iine over time
Sears is not responsible for property damage due to
improper installation or water connection.
Water pressure must be between 20 to 100 pounds per
Water pressure is low. square inch to function propedy A minimum pressure of 35
pounds per square inch is recommended for units with
Ice forms in inlet tube to ice water filters.
maker
See the controls section in this Use and Care Guide for
Freezer temperature is too high assistance on how to adjust your controls. Freezer is
recommended to be between 0 to 2°F (-18 to-17°C).
Water pressure must be between 20 to 100 pounds per
square inch to function propedy A minimum pressure of 35
Water pressure is low. pounds per square inch is recommended for units with
water filters.
Check water connection procedure written in "Installing
Water flow is slower than Your Refrigerator". Self-piercing and 3/_6"saddle valves
normal Improper water valve was installed, cause low water pressure and may cIog the tine over time
Sears is not responsible for property damage due to
improper installation or water connection.
Turnoffwatersupplyand remove kinks Ifkinkscannotbe
Copper or plastic tubing has kinks, removed, replace tubing.
Change water filter.
Atlow approximately 12 hours for water in holding tank to
chill
Dispenser water is not cold
Water filter is cIogged or needs to be
changed
Refrigerator has been recently installed
Water suppty in holding tank has been
depleted
Water has settled into water lines outside
holding tank and has warmed to room
temperature.
Discard first glass of water and refilI
24
Loading ...
Loading ...
Loading ...