Loading ...
Loading ...
Loading ...
Electrical connection
81
All electrical work should be carried out
by a suitably qualified and competent
person only, in strict accordance with
current national and local safety regula-
tions (BS 7671 in the UK). Installation,
repairs and other work by unqualified
persons could be dangerous. The man-
ufacturer cannot be held liable for unau-
thorised work. Before connecting the
machine make sure that the voltage and
frequency quoted on the data plate are
compatible with your household elec-
trical supply. Please consult a qualified
electrician if you are in any doubt.
The required connection data is quoted
on the data plate. This can be seen on
the left-hand side when the drip tray is
pulled out.
The machine is supplied with a mains
cable with moulded plug for connection
to a 50Hz 220–240V supply.
The coffee machine must be connected
to the mains supply via a fused plug
and suitable switched socket.
WARNING: THIS APPLIANCE MUST
BE EARTHED.
The fuse rating must be at least 10A
(13A fuse in the UK).
The socket should be next to the appli-
ance and easily accessible. If the
socket is not accessible an additional
means of disconnection must be
provided for all poles.
Do not connect the machine to the
mains electricity supply by a multi-
socket adapter or an extension lead.
These are a fire hazard and do not guar-
antee the required safety of the appli-
ance.
Do not connect the machine to an in-
verter such as those used with an
autonomous energy source e.g. solar
power. When switched on, peak loads
in the system can cause the safety
switch off mechanism to be triggered.
This can damage the electronic unit.
The coffee machine must not be used
with so-called energy saving devices
either. These reduce the amount of en-
ergy supplied to the machine causing it
to overheat.
If the connection cable is faulty, it may
only be replaced by a qualified electri-
cian in order to avoid a hazard.
Loading ...
Loading ...
Loading ...