Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
75
Electrical connection
Danger of injury!
Installation, repairs and other main-
tenance work by unqualified persons
could be dangerous. Miele cannot be
held liable for unauthorised work.
The appliance may only be connec-
ted to the mains electricity supply by
a qualified electrician who is familiar
with and complies with the national
regulations and any additional regu-
lations of the local electricity pro-
vider.
The appliance must be connected to an
electrical system designed in accord-
ance with VDE0100.
Connection to a switched socket (in
accordance with VDE0701) is recom-
mended as this provides easier access
in the case of a service call.
If the appliance is hardwired or if the
plug is not accessible, an additional
means of disconnection must be
provided for all poles.
Suitable means of disconnection in-
clude switches with an all-pole contact
gap of at least 3mm. These include cir-
cuit breakers, fuses and contactors
(EN60335).
Connection data is given on the data
plate situated at the front of the oven
compartment. Please ensure the con-
nection data matches the household
supply.
When contacting Miele, please quote
the following:
- Model identifier
- Serial number
- Connection data (mains voltage/fre-
quency/maximum rated load)
When replacing the cable supplied
with another cable or changing the
connection, only cable type
H05VV-F with a suitable cross-sec-
tional area (CSA) may be used.
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not syn-
chronised with the mains power supply
(e.g. island networks, back-up systems)
is possible. A prerequisite for operation
is that the power supply system com-
plies with the specifications of
EN50160 or an equivalent standard.
The function and operation of the pro-
tective measures provided in the do-
mestic electrical installation and in this
Miele product must also be maintained
in isolated operation or in operation that
is not synchronised with the mains
power supply, or these measures must
be replaced by equivalent measures in
the installation. As described, for ex-
ample, in the current version of
BS OHSAS 18001–2 ISO 45001.
Loading ...
Loading ...
Loading ...