Loading ...
Loading ...
Loading ...
Lockengaged
for door removal
Figure 1
HINGE SLOT
Door removed from the range
Figure 2
Lock in normal
position
Figure 3
Care and C_eaning of Stainless Stee_ (Stainless Steel models only)
Some modeUsare equipped with stainUess steeUexterior parts, SpeciaUcare and cUeaningare
required for maintaining the appearance of stainUessparts, PUeaserefer to the tabUeprovided
at the beginning of the General Care & Cleaning section in this Use & Care Guide,
Removing and Replacing the Oven Door
_The door is heavy, For safe, temporary storage, lay the door fiat with the inside
of the door facing down,
To Remove Oven Door:
1, Open the door to the fully opened position,
2, Pull up the lock located on both hinge supports and engage it in the hinge levers
(Figure 1),You may have to apply a little downward pressure on the door to pull the
3, Grab the door by the sides, pull the bottom of the door up and toward you to disengage
the hinge supports, Keep pulling the bottom of the door toward you while rotating the top
of the door toward the range to completely disengage the hinge levers (Figure 2),
4, To clean oven door, follow the instructions provided in the GeneraJ Care & Cleaning
table,
To RepJace Oven Door:
1, Grab the door by the sides; place the hinge supports in the hinge slots, Open the door to
the fully opened position,
2, Disengage the lock from the hinge levers on both sides (Figure 3),
Note: Make sure the hinge supports are fully engaged before unlocking the hinge levers,
3, Close the oven door,
Specia! Door Care instructions - Most oven doors contain glass that can break,
Read the following recommendations:
1, Do not close the oven door until all the oven racks are fully in place,
2, Do not hit the glass with pots, pans, or any other object,
3, Scratching, hitting, jarring or stressing the glass may weaken its structure causing an
increased risk of breakage at a later time,
Removing and Replacing the E×terna_ Door G_ass Pane_
Applicable only to models with an external glass panel not held with frame, This design allows
you to clean the inside face of the exterior door panel as well as the hidden face of the door
inner glass,
To Remove the ExtemaJ Door Glass Panel:
1, Remove the door as described in Removing and Replacing the Oven Door section and
lay the door flat,
2, Using a screwdriver, remove the 5 screws fastening the glass & molding assembly,
3, Grasp both sides of the glass panel and slowly pull it out of the door upper molding, Lay
the glass flat,
To RepJace the E×terna! Door GJaee Paneh
1, Grasp the sides of the glass panel carefully insert the glass into the door top molding,
2, Replace the 5 locking screws,
3, Replace the door onto the range,
Handle the glass panel with care, When dropped on a corner, the glass panel
may shatter, This can cause several persona injury,
2O
Loading ...
Loading ...
Loading ...