Loading ...
Loading ...
Loading ...
English 51
Troubleshooting
Troubleshooting
If there is any problem, check the information message on the LED screen and follow the on-
screen instructions.
If the problem persists, please contact the service center.
Checkpoints
If you encounter a problem with the washing machine, rst check the table below and try the
suggestions.
Problem Action
Does not start.
•Make sure the washing machine is plugged in.
•Make sure the door is properly closed.
•Make sure the water taps are open.
•Tap
Start/Pause to start the washing machine.
•Make sure Child Lock
is not activated.
•Before the washing machine starts to ll, it will make a series
of clicking noises to check the door lock and will do quick
drain.
•Check the fuse or reset the circuit breaker.
•Check if power is supplied properly.
•Low voltage detected.
- Check if the power cord is plugged in.
•Make sure laundry is not caught in the door.
Water supply is
insufcient, or no
water is supplied.
•Fully open the water tap.
•Make sure the door is properly closed.
•Make sure the water supply hose is not frozen.
•Make sure the water supply hose is not kinked or clogged.
•Make sure there is sufcient water pressure.
•Make sure that the cold water tap and the hot water tap are
properly connected.
•Clean the mesh lter as it may be clogged.
After a cycle,
detergent remains in
the detergent drawer.
•Make sure the washing machine is running with sufcient
water pressure.
•Make sure the detergent is added to the centre of the
detergent drawer.
•Make sure the rinse cap is inserted properly.
•If using granular detergent, make sure the detergent selector is
in the upper position.
•Remove the rinse cap and clean the detergent drawer.
WD80T4046EE_04215E-00_EN.indd 51 2021/2/3 17:17:55
Loading ...
Loading ...
Loading ...