Loading ...
Loading ...
Loading ...
36 English
Operations
Operations
Control panel
09
02
08
03
04
05
06
07
01
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03 Temp.
Press to change the water temperature for the current cycle.
04
Spin
Press to change the spinning speed for the selected cycle.
•Rinse Hold (No indicator): The nal rinse cycle is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin cycle.
•No Spin
: The drum does not spin after the nal drain cycle.
•Spin Only : To run the Spin Only cycle, press Spin for 3
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected. Then,
press Start/Pause to start the cycle. The spinning time depends
on the selected cycle.
05
Dry Option
Press this button to select proper drying option.
06
Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to nish a wash at the time you
normally return home from work.
•Press to choose a preset unit of hours.
07
Options
Press to select the options. Availability of the options depends on
the cycle.
WD80T4046EE_04215E-00_EN.indd 36 2021/2/3 17:17:51
Loading ...
Loading ...
Loading ...