Loading ...
Loading ...
Loading ...
OVERLOADRESETSWITCH-
Protectsthemotorif itoverloadsduring
operation,providesawaytorestartthe
saw.
PUSHSTICK- Usedto push
workpieceswhenperformingripping
operations.
PUSHBLOCK-Usedforripping
operationwhentheworkpieceistoo
narrowto useapushstick.Alwaysuse
a pushblockforripwidthslessthan2in.
(50.8mm).
RESAWING- Flippingmaterialto
makeacutthesawisnotcapableof
makinginonepass.
i,A WARNING i
Do not resaw material with this saw.
REVOLUTIONS PER MINUTE (RPM)
- The number of turns completed by a
spinning object in one minute.
RIP FENCE -A guide used for rip
cutting which allows the workpiece to
cut straight.
RIPPING - Cutting with the grain of
the wood or along the length of the
workpiece.
RIVING KNIFE-A metal piece of the
guard assembly located behind and
in-line with the blade. Slightly thinner
than the saw blade, it helps keep the
kerr open and prevents kickback.
SAW BLADE PATH - The area of the
workpiece or table top directly in line
with the travel of the blade or the part
of the workpiece that will be cut.
SET - The distance between two saw
blade tips, bent outward in opposite
directions to each other. The further
apart the tips are, the greater the set.
TABLE INSERT - Insert that is
removed from the table to install /
remove blades. When dado cutting, a
dado insert plate must be used.
THROUGH SAWING - Making a cut
completely through the length or width
of a workpiece.
WORKPIECE - Material to be cut.
Saw blade path
Leading
Surface
Workpiece
edge
of
workpiece
NOTE: Blade guard assembly is
removed for purposes of illustration only.
Loading ...
Loading ...
Loading ...