Loading ...
Loading ...
Loading ...
station name. Secondary services may not be available in your area.
“?”: If this symbol appears next to the station name, it means the station is invalid or inactive.
“Not Available”: Shown when tuning a DAB station with an insufficient signal.
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 3.0 and that your device is not con-
nected to any other Bluetooth product. Devices may pair differently. Below is a general guide.
1. Change the source to Bluetooth, then press and hold the Scan button. Turn the volume
up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initi-
ate searching. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli
Bluetooth” will change from “Not Paired” to “Connected”.
4. You will hear a ring tone from the PAL+BT confirming connection and you can begin
playing your music files wirelessly. Adjust the volume level on your device. You should
not have to pair your device again. Depending on your device, you may need to make
multiple attempts at Pairing and/or Connecting to the PAL+BT, but please give your
device adequate time to Pair or Connect before repeating the process.
Pairing A Bluetooth Wireless Technology Enabled
iPhone/iPod Touch/iPad
1. Change the source to Bluetooth, then press and hold the Scan button. Turn the volume
up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Select “Settings” (depending on software version).
3. Select “General”.
4. Select “Bluetooth”.
5. Switch Bluetooth “On” to initiate searching.
6.
Select “Tivoli Bluetooth (Not Paired)” when it appears on the display. If you are
prompted to enter a PIN, enter “0000”. “Tivoli Bluetooth” will change from “Not
Paired” to “Connected”.
7. You will hear a ring tone from the PAL+BT and you can begin playing your music files wire-
lessly. Adjust the volume level on your device. You should not have to pair your iPhone/
iPod/iPad again.
The volume output level of music files varies. If you prefer an even higher output level,
check the settings in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off,
and the Volume limit Off.
If you encounter a problem Pairing, press the small arrow to the right of “Tivoli Bluetooth” on
your iPhone/iPod touch/iPad display and select “Forget this Device”, then repeat the Pairing
process. Depending on your device, you may need to make multiple attempts at Pairing and/
15 – ENGLISH
Loading ...
Loading ...
Loading ...