Loading ...
Loading ...
Loading ...
(RDS). For any of the auto updates to work, you must have consistent reception of DAB
or FM RDS with a time/date signal provided. It could take up to a minute or more for the
clock to update. Tivoli Audio is not responsible for inaccurate time/date information
provided by the auto update signal.
To set the clock manually, select “No Update”, and then select “Set Time/Date” under
the “Time” menu using the pq or t u buttons and the Select button to set the
hour. Repeat to set the minutes and press Select to save. Within this same “Time” menu
are additional options to set the date format and 12/24 hour clock mode.
NOTE: During a power outage, the alarm time(s) and clock will be maintained by an inte-
grated back-up memory. When “Auto update” is set to “Update from any”, the radio may
find the clock signal from the last listened station, even when the PAL
+BT
is in standby.
Set Date Format: Press the Select button and use the pq and Select buttons to choose
the date format you prefer.
4. BACKLIGHT (FOUND UNDER SETTINGS):
Timeout: The backlight level is configured at the factory to be constant. However,
you can customize the backlight to automatically change to a “Dim level” setting after
a fixed period of time whenever no controls are used. Once a control on the unit or the
remote is pressed, the normal backlight level is restored.
Press Select and use the pq and the Select buttons to set the amount of time it will
take for the backlight to change to the dim level from 10, 20 ,30, 45, 60, 90, 120, or 180
seconds, or to keep the timeout feature Off.
On Level: Press Select and use the pq and Select buttons to choose the intensity of the
backlight.
Dim Level: If you selected a time for the backlight to change to a dim setting under
“Timeout”, press Select and use the pq and Select buttons to choose the intensity of
the backlight when it changes to this dim setting. Setting the Dim level to “Off” may
be desirable if the display backlight is bothersome while sleeping. Using the Dim level
feature may also help to maximize battery playback time.
5.
LANGUAGE (FOUND UNDER SETTINGS): Press Select and use pq and Select
buttons to set your language.
6. FACTORY RESET (FOUND UNDER SETTINGS): Press Select and use the pq or tuand
Select buttons to confirm (Yes) or reject (No) the factory reset. A factory reset will restore
factory defaults and cancel all your personal settings, such as station presets and lan-
guage. The Factory Reset may not be accessible when operating on battery-only power.
7. ID (FOUND UNDER SETTINGS): Press Select to view the ID. If you contact your dealer or
Tivoli Audio with a question, you may be asked to provide the number shown in this field.
8. SLEEP (FOUND UNDER SETTINGS): Press Select and use the pq button and the
Select buttons to set the sleep timer to one of the available times. There is also a dedi-
cated Sleep button on the remote control. A small clock face will show on the display
when the Sleep timer is active.
NOTE: When operating on battery-only power (external adapter not plugged-in), if Sleep
is engaged and the alarm is set, after Sleep ends, the alarm will not sound. To use both
Sleep and Alarm features, please be sure the external adapter is connected.
12 – ENGLISH
Loading ...
Loading ...
Loading ...