Loading ...
Loading ...
Loading ...
10. tu: The right arrow button duplicates the Select button. The left arrow button duplicates
the “Back” button in certain menu items.
11. MENU/SELECT: Press and hold to enter the main menu and press briefly to select
items within the menu. For more, see the section marked “Menu”.
12. BACK: Press to go back to the previous menu page.
13. MONO: Press to change the Stereo/Mono setting. The display will show “M” for mono
and “ST” for stereo. “Mono” or “Stereo” will also be one of the fields shown when
pressing the Info button on the remote in FM mode. If you are listening to a noisy FM
station in stereo, switching to mono may improve reception. Note: only FM mode can be
changed to Mono. Also see “Balance” under “Menu and Specific Features”.
14. BATTERY HOLDER: Remove the protective strip protruding from the battery holder
before using the remote control. Should you ever need to replace the remote’s battery,
use Lithium button cell battery model CR2025.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only
with the same or equivalent type. Dispose of spent battery according to your country’s
regulations.
Note: With the radio in standby, briefly press the p button on the remote control twice
to turn the display off. While the display is off, briefly press the p button once to turn the
display on for 10 seconds. Briefly press the p button on the remote two more times to turn
the display back on.
Menu and Specific Features
Press and hold the Menu button on the remote to enter the main menu. Use the
remote’s t u buttons and the Select button to change the items within the menu. Use
the Back button to navigate back, or wait for 15 seconds until the timeout expires.
An asterisk (*) indicates the shown menu item is currently set.
1. SCAN SETTING (FM MODE ONLY): Press the Select button and use the pq and
Select button to choose between “Strong stations only” or “All stations” when per-
forming an Full Scan (see #9 (pq) under “Remote Control”). Selecting “All stations”
increases the sensitivity of the scan, possibly resulting in the Full Scan stopping on
noise. This feature is not accessible in Auxiliary mode.
2. EQUALIZER: Press the Select button and use the t u buttons to select the desired
EQ setting from the following options: Normal, Classic, Jazz, Pop, Rock, and Speech.
Press the Select button to enable the desired EQ setting.
3. TIME (FOUND UNDER SETTINGS):
Set 12/24 hour: Press the Select button and use the pq and Select buttons to choose
a 12 or 24 hour clock format.
Set Time/Date: Press the Select button and use the pq and Select buttons to adjust the
hour and then minutes, immediately followed by the date. You must set the Auto update
to “No update” in order to set the time manually. For more, refer to “Auto update” below.
Auto Update: Press the Select button and use the pq and Select buttons to choose
between “Update from any”, “Update from DAB” (also DMB), or “Update from FM”
11 – ENGLISH
Loading ...
Loading ...
Loading ...