Loading ...
Loading ...
Loading ...
Guide to Features (Remote Control)
1.
POWER: Press briefly to power the PAL
+BT
on. The
radio will power on to the last source used. Press
again to power off. The remote’s Power button
will not turn the PAL
+BT
on when the unit is off
and not connected to the external power supply.
2.
MUTE/SNOOZE: Press to mute the audio (the icon
will show no volume bars) while the unit is playing
and press again to restore sound, or adjust the
volume. Press to mute the alarm after the alarm
sounds. A icon will show on the display when
Snooze is active. The Snooze time is fixed at 7 min-
utes and is not adjustable. The Snooze function
works when the PAL
+BT
is connected to the exter
-
nal power supply. When operating on battery-only
power, pressing Snooze will have no effect.
3. ALARM: Use the t u and Select buttons to
adjust and set the alarms. For very important
notes and a complete step-by-step guide, refer
to the section titled “How to set the Alarm”.
4. SLEEP: Press repeatedly to view the amount of time the radio will play before it turns
off automatically and press the Select button to select that time. When the sleep timer
is active you can check the remaining time by pressing the Sleep button on the remote.
A small clock face [ ] will show on the display when the Sleep timer is active. To
cancel Sleep, press the Sleep button until the display shows “Off”. When operating
on battery-only power (external adapter not plugged-in), if Sleep is engaged and the
alarm is set, after Sleep ends, the alarm will not sound. To use both Sleep and Alarm
features, please be sure the external adapter is connected.
5. SOURCE: Press repeatedly to change sources.
6. INFO: Press repeatedly to cycle through the information available depending on the
source mode. This function does not work in Auxiliary mode.
7. PRESETS 1-5: Press and hold to store the currently tuned station. Press briefly to recall
the station associated with that specific preset. In FM mode, the preset number will be
indicated on the display. There are 5 presets for each band.
8. VOLUME
+
/–: Press the Volume
+
button to raise the volume level or the Volume –
button to lower the volume level. If the audio ever sounds distorted, lower the volume
level to avoid damaging the speaker. Adjusting the volume while the PAL
+BT
is muted
will cancel the muting.
9. pq: Press to navigate within the menus. Use these same buttons to manually tune up or
down when in FM mode and to Full Scan stations. A “T” will show on the display to
indicate manual tuning mode. Press and hold to move quickly through the frequencies.
It will take a second until the frequencies begin to change. Press for 1.5 seconds and
release to Full Scan to the next station detected. The display will show “Scanning…”
Also refer to “Scan Setting” under the section “Menu and Specific Features”.
VOLUME
TU
_
TU
+
MUTE
SNOOZE
ALAR M ALAR M
SL EEP SOURCE
INFO
1
2
3 4
5
BA CK
MENU
SELECT
MONO
Tivoli Audio
PAL
+
4
2
3
5
1
6
7
9
13
10
14
11
12
8
10 – ENGLISH
Loading ...
Loading ...
Loading ...