Loading ...
Loading ...
Loading ...
12
INSTALLATION REQUIREMENTS
DRAIN SYSTEM
The following parts are optional for specific models.
If your dryer has following parts, please wear gloves and install them as per the
instruction below.
Condensing drain hose
Connector
Installation
1. Take the hose out of the holder.
2.Disconnect the hose from the water container inflow.(To assure water tightness,
there is tension between the hose and the inflow and therefore an increased
force is required for disassembly.)
3. Insert the drain hose and the external drainage hose into the connector.
4. Put the hose on the washing basin or floor drain. To assure the smooth drainage, ensure
the pipe is not folded.
ELECTRIC REQUIREMENTS
The wiring diagram is located on the back board of the unit.
- The improper connection of the equipment grounding conductor can result
in the risk of electric shock. Check with a qualified electrician or serviceman
if you are in doubt as to whether your dryer is properly grounded. Do not
modify the plug provided with your dryer - if it doesn’t fit the outlet, have a
proper outlet installed by a qualified electrician.
- To prevent unnecessary risk of fire, electrical shock, or personal injury, all
wiring and grounding must be done in accordance with local codes, or in
the absence of local codes, with the National Electrical Code, ANSI/NFPA
No. 70 - Latest Revision (for the U.S.) or the Canadian Electrical Code CSA
C22.1 - Latest Revisions and local codes and ordinances. It is your
responsibility to provide adequate electrical services for your dryer.
- All gas installations must be done in accordance with the National Fuel
Code ANSI/Z2231 - Latest Revision (for the U.S.) or CAN/CGA - B149
Installation Codes - Latest Revision (for Canada) and local codes and
ordinances.
WARNING
Max. 78cm
x
Loading ...
Loading ...
Loading ...