Loading ...
Loading ...
Loading ...
Programmable functions
75
Suds cooling
When this is activated, additional
water flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a
Cottons programme with a temperature
of 70°C or higher is selected.
Suds cooling should be activated:
- to prevent the danger of scalding if
the drain hose is hooked over the
edge of a laundry tub or trough.
- where the drainage pipes are rated
less than 70°C.
Options
= Suds cooling is switched off
(factory default setting)
= Suds cooling is switched on
Anti-crease
The Anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
At the end of the programme, the drum
continues to turn at intervals for up to
30min. The door can be opened at any
time during the Anti-crease phase.
Options
= The Anti-crease function is
switched off (factory default
setting)
= The Anti-crease function is
switched on
Low water pressure
If the water pressure is below 100kPa
(1bar), the washing machine cancels
the programme and the fault
message appears.
If the water pressure cannot be
increased, activating this function will
prevent the programme from being
cancelled.
Options
= Low water pressure is
switched off (factory default
setting)
= Low water pressure is
switched on
Loading ...
Loading ...
Loading ...