Loading ...
Loading ...
Loading ...
D and W Series NGTeco Time Clock User Manual
Page | 54 Copyright©2021 NGTeco. All rights reserved.
2. Press <3> to add a new connection. The interface to add a new connection will be
displayed as shown below:
Figure 9-5: SSID and Password
3. Enter the [SSID] and [Password].
4. Navigate to [Confirm] and press <M/OK>.
9.1.3 Enable/Disable DHCP
To enable/disable DHCP, perform the following steps:
1. Go to [Comm.] then [Wi-Fi Setting].
2. Press <0> to view the DHCP settings.
3. By default, DHCP will be on.
Figure 9-6: DHCP Interface
4. If you disable DHCP, you must manually set the IP Address, Subnet mask, and Gateway
by pressing <>. The interface is shown below:
Loading ...
Loading ...
Loading ...