AmazonBasics Out User Manual

Loading ...

D and W Series NGTeco Time Clock User Manual

3. Enter the following details:

Maximum Work Hours: Set the maximum number of working hours in a day. When the time

difference between two attendance punches (check-in and check-out) exceeds this maximum

work hour, then the attendance will be calculated separately for that day. Then you can

identify that there are missing attendance punches between the actual punches made by the

users. The default value is 12 hours.

Auto Punch Mode: When this feature is enabled, the punch state will not be displayed on the

home screen and the punch state will be updated automatically based on the previous punch

state of the user. For example, if the user’s first punch state is Check-in, then the next punch

state is Check-out. This feature is enabled by default.

Note: When the time exceeds the Day Cutoff Time, the punch state will be reset to Check-in.

If the Auto Punch Mode is turned off, the user needs to select the punch state manually and

the punch state will be displayed on the home screen. Press the ☉/< button to change the

punch state to IN, and the <M/OK> button to change the punch state to OUT. The punch state

is Check-in by default and if the user presses the <M/OK> button the state will change to

Check-out for five seconds. Then, the state will be auto-changed to Check-in.

Day Cutoff Time: Set the time on which the day is changed to the next day on the clock.

Example: Consider the day change time is set to 2:00 AM. If the users start to work before 2:00

AM, then the total worked hours until check-out will be added to the previous day. If the users

start to work after 2:00 AM, then the total worked hours until check-out will be added to the

next day.

Duplicate Punch Interval: The Duplicate Punch interval defines the time duration in which

the clock considers only the first attendance punch, even if you make many attendance

punches within the defined period. The unit is minutes.

Loading ...

AmazonBasics Out