Loading ...
Loading ...
Loading ...
Problem solving guide
153
Problem Cause and remedy
After moving house, the
steam oven no longer
switches from the heat-
ing-up phase to the
cooking phase.
The boiling temperature of the water has changed as
the altitude of the new location for the appliance dif-
fers from the old one by at least 300m.
To adjust the boiling temperature, you need to de-
scale the appliance (see “Care” in the “Cleaning
and care” chapter).
During operation an un-
usually large amount of
steam escapes, or
steam escapes from
parts of the oven where
it does not usually.
The door is not properly closed.
Close the door.
The door seal is not correctly fitted.
Press it in all the way round the door to make sure
it is fitted evenly.
The door seal is damaged, e.g. cracks can be seen.
Replace the door seal.
This can be ordered from Miele (see the end of this
booklet for contact details).
The oven interior light-
ing is not working.
The lamp is defective.
Call Miele Service to have the lamp replaced.
The control panel will
not open or close auto-
matically despite touch-
ing the sensor sev-
eral times.
Something is obstructing the control panel.
Remove the obstruction.
The obstruction sensor is very sensitive and can pre-
vent the panel opening or shutting if it picks up a sig-
nal.
Open/close the control panel manually (see end of
this section)
If the problem occurs again, contact Miele Service.
The Start at and Finish at
functions are not avail-
able.
The temperature in the oven compartment is too
high, e.g. after a programme has finished.
Open the door and let the oven compartment
cool down.
These functions are not generally available in main-
tenance programmes.
Loading ...
Loading ...
Loading ...