Loading ...
Loading ...
Loading ...
IdentifytheStabilizer(9)whichhasround
Endcaps(21)ontheends.Whileanotherper-
sonliftsthefrontoftheFrame(1),attachthe
StabilizertotheFramewithtwoM10x75mm
CarriageBolts(34)andtwoM10Nylon
Locknuts(33).
34
21
34
21
33
WhileanotherpersonliftsthebackoftheFrame
(1),attachtheotherStabilizer(9)totheFrame
withtwoM10x75mmCarriageBolts(34)and
twoM10NylonLocknuts(33).
9
,
The Console (23) requires four 1.5V "D" batter-
ies (not included); alkaline batteries are recom-
mended. IMPORTANT: If the elliptical exercis-
er has been exposed to cold temperatures,
allow it to warm to room temperature before
inserting batteries into the Console. If you
do not do this, the console displays or other
electronic components may become dam-
aged. Remove the battery cover from the
Console, and insert four batteries into the
Console. Make sure that the batteries are ori-
ented as shown by the markings on the bat-
tery cover. Then, reattach the battery cover.
23
Batteries
Battery
Cover
4,
While another person holds the Console (23) in
the position shown, connect the console wire to
the Extension Wire (68).
Attach the Console (23) to the Upright (2) with
the four Console Screws (59) included with the
Console. Be careful to avoid pinching the
wires.
Attach the Water Bottle Holder (29) to the
Upright (2) with two M4 x 22mm Screws (63).
23
\
Console Wire
59
29
6
Loading ...
Loading ...
Loading ...