Loading ...
Loading ...
Loading ...
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own Phillips screwdriver _, adjustable
wrench o__, and rubber mallet ___;___{_q
I
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the parts bag, check to see if it has been preassembled. If a part is missing,
call 1-888-533-1333.
M8 Split
Washer (28)-4
\
\
M10 Split M8 Handlebar
Washer (45)-2 Washer (71)-4 Washer (55)-2
\\\
\
\\\
MIO
Washer (35)-2
Wave
Washer (69)-2
Large Wave M8 Nylon M10 Nylon
Washer (76)-2 Locknut (38)-4 Locknut (33)-6
M8 x 25mm Patch
Screw (56)-2
M10 x 74mm Button Bolt (7)-2
M4 x 22mm
Screw (63)-2
M8 x 52mm Button
Screw (27)-4
, /
M10 x 27mm
Patch Screw (40)-2
/
M10 x 75mm Carriage Bolt (34)-4
M8 x 45mm Button Bolt (50)-4 M6 Bolt Set (25)-2
Loading ...
Loading ...
Loading ...