GE - General Electric AJES10DCCW2 GE room air conditioner

User Manual - Page 2

For AJES10DCCW2.

PDF File Manual, 24 pages, Download pdf file

Loading ...
IMPORTANTSAFETYINFORMATION.
READALLINSTRUCTIONSBEFOREUSING.
WARNING'!
For your safe_ the information in this manual must be followed to minimize the risk of fire, electric
shock or personal injury.
SAFETYPRECAUTIONS
Use this appliance only %r its intended
puq)ose as described in this Owner's
Manua].
This air conditioner must be properly
installed in accordance with the
Installation Instructions before it is used.
Ne_er unplug your air conditioner 1)y
pulling on tim power cord. Always g_iI)
plug firefly and pull straight Otlt from the
receptacle.
Replace immediately all electric service
cords that have become frayed or
otherwise damaged. A damaged power
supply cord must be replaced with a new
power supply cord obtained flom the
manufacturer and not repaired. Do not
use a cord that shows cracks or abrasion
damage along its length or at either the
plug or connector end.
_{:_Turn the mode control OR=and unplug
your air conditioner before making any
repairs or cleaning.
NOTE:Westronglyrecommendthat anyservicing
beperformedbya qualifiedindividual.
_{:;For your safety...do not store or use
combustible materials, gasoline or oflmr
flammable vapors or liquids in the vicinity
of this or any other appliance.
;_?:,:All air conditioners contain refi-igerants,
which under federal law must be remoxed
prior to product disposal. If you are getting
rid of an old product with refcigerants,
check with the company handling disposal
about what to do.
2
HOWTOCONNECTELECTRICITY
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord.
For personal safety, this appliance must be
properly grounded.
The power cord of this appliance is equipped
with a 3-prong (grounding) plug which
mares with a standard 3-prong (grounding)
wall outlet m minimize the possibility of
electric shock hazard flom this appliance.
Power cord may include a ctliTent
inte[wupter device. A test and reset button is
provided on the plug case. The device should
be tesmd on a periodic basis by first pressing
the TESTbutton and then the RESETbutton.
If file TESTbutton does not trip or if die
RESETbutmn will not stay engaged,
discontinue use of rite air conditioner
and contact a qualified se_Mce technician.
Haxe the wall outlet and circuit checked
1)ya qualified electrician to make sure the
outlet is properly grounded.
Where a 2-prong wall outlet is encountered,
it is your personal req)onsibilitv and
obligation to have it replaced with a i)roperly
grounded 3-prong wall outlet.
The air conditioner should always be plugged
into its own individual electrical outlet which
has a x_ltag> rating that matches the rating
plate.
This provides the best perfommnce and also
prexents oxerloading house wiring circuits
which could cause a fire hazard flom
oxerheated wires.
See the Installation Instructions, Electrical
Requirements section for specific electrical
connection requirements.
Loading ...
Loading ...
Loading ...