Loading ...
Loading ...
Loading ...
Refrigerator Features (cont.)
Adjustable Cantilever Glass
Shelves. These shelves attach to
metal tracks in the back of the
interior. See Figure 31. To remove,
tap upwards at rear of shelf hooks.
Lift shelf and pull out, To install, tilt
shelf and engage upper hooks in
desired track slots. Lower shelf front
and tap downwards near the tracks
until shelf hooks are securely seated
and shelf is level.
FIGURE 31
CAUTION
ToAvoidPersonal Injury Or
Property Damage test for proper
installation by exerting light
pressure downward on the front
edge. Shelf should not move,
To Adjust the Refrigerated
Meat Storage Drawer
The RefrigeratedMeat Keeper must be
installed with itscold air supply tube
covering the air inlet port completely. To
ensure proper alignment, only insertthe
upper hooks of the shelf into the 9th,
10th, 11thor 12th track slots from the
top. See Figure 32. Otherwise, food will
freeze below the uncovered air supply
hole, located in the back left side wall.
Humidity Controlled Crisper
Drawers
These drawers are for storage of
fresh fruits and vegetables. It is
normal for moisture to accumulate
inside. See Figure 33.
FIGURE 33
Crisper Drawers can be pulled out
fully, even when door is opened at a
minimum of 90 ° angle.
FIGURE 34
Hi-Humidity Drawers have a
control to regulate humidity inside. Set
high humidity for leafy vegetables such
as cabbage and lettuce, and set low
humidity for produce with skins such as
apples and tomatoes, Slide to the left
for high humidity and to the right for low
humidity. See Figure 35.
FIGURE 32
FIGURE 35
......... i_,ruuul
14
Loading ...
Loading ...
Loading ...