Loading ...
Loading ...
Loading ...
Live Smart, Better Life!
20
3330-A Marathon Ct Charleston, SC 29418
Important:
If the cooktop is being installed into a blind counter(one with no cabinet
opening below), wire connections must be made before putting the cooktop
into the cutout opening.
1. Pre-test checklist
A. Remove all protective film, if present, and any stickers.
B. Check to be sure that all wiring is secure and not pinched or in contact
with moving parts.
C. Check level of appliance.
D. Check that the cooktop is properly grounded.
2. Operation checklist
A. Remove all items from the top of the cooktop surface.
B. Turn on the power to the cooktop. Verify that all surface burners operate
properly.
C. Check that the circuit breaker is not tripped nor the house fuse blown.
D. Check that conduit is securely connected to the junction box.
E. See troubleshooting list.
Note to electrician:
The power leads supplied with this appliance is UL recognized for connections
to larger gauge household wiring. The insulation of these leads is rated at
temperatures much higher than the temperature rating of household wiring.
The current carrying capacity of a conductor is governed by the wire gauge
and also the temperature rating of the insulation around the wire.
Note: ALUMINUM WIRING
• WARNING: IMPROPER CONNECTION OF ALUMINUM HOUSE WIRING
TO THE COPPER LEADS CAN RESULT IN A SERIOUS PROBLEM.
• Splice copper wires to aluminum wiring using special connectors designed
and UL approved for joining copper to aluminum and follow the
manufacturer’s recommended connector procedure closely.
Note: Wire used, location and enclosure of splices, etc., must conform to good
wiring practice and local codes.
Loading ...
Loading ...
Loading ...