Loading ...
Loading ...
Loading ...
26 27
CATALYIC LINERSCLEANING
releasing the grill element
We have designed the upper element with a hanger clip to
help you reach your oven roof for cleaning.
Retaining wire models
•Liftelementupcarefully.
•Pullhangercliptotheleftorrighttounhookit.The
element will drop down freely.
Rotating latch models
•Rotatelatch180º.Theelementwilldropdownfreely.
Removing the side racks (shelf supports)
•Grasptheshelfsupportsatthefront.
•Pullthemrmlyinwards.
•Toinstalltheshelfsupports,seepage7.
Removing and replacing the oven light and side
light (where fitted)
•Turnovenlightglassanticlockwisetoremoveitforglobe
replacement.
•Aspecialhightemperatureresistantglobeshouldbe
used. This can be purchased from the Customer Care
Centre.
•Toremovesidelight,placeaspoonunderthelightglass
and lever off. Replace globe and snap glass cover back
into position.
warning
Make sure the appliance is turned off before
you remove or replace parts, to avoid the
possibility of electric shock.
Removing and replacing the catalytic fan baffle
(where fitted)
•Removethe2retainingscrewsonthetopedgeofthe
fanbafe.
•Pullthetopedgetowardsyouandthendisengageto
bottom tabs from the oven back.
important
•Insertthetwotabsatthebottomofthefanbafeintotheir
corresponding slots in the oven back.
•Pushthetophomeandinsertscrewsrmlyinto
appropriate holes.
•Thefanbafemustnotbeloose.
catalytic liners
Some models come with Catalytic liners. These models
contain:
•2Catalyticsideliners(tobettedbyyou)
•1Catalyticfancover(alreadytted)
operation
The catalytic liners are coated with a specially formulated
enamel coating, over a base of regular enamel. This enamel
coating has a rough surface which is also porous. During
normal cooking, fats and other food spatter is partially
absorbed into the surface and then oxidised away.
This oxidisation of the fat works best if the oven is set at high
temperatures.Ifyoudoalotoflowertemperaturebaking,
say around the normal 180ºC, then the cleaning process
may not be complete. Every now and then you should turn
the oven on to 260ºC for around one hour to completely
remove the soil.
cleaning
Should the panels become heavily soiled, they will need to
be taken out of the oven and cleaned by hand. They should
be soaked in warm, soapy water for at least 2 hours and
then wiped clean with a soft cloth.
Removing the catalytic liners
•RemoveSideRacks(seepage24).
•Liftthelineruptodisengagethehooks.
•Thelinersshouldnowbefreetobepulledintowardsthe
centre of the oven.
•Refertopage7forre-installingyoursideliners.
Loading ...
Loading ...
Loading ...