Loading ...
Loading ...
Loading ...
18 19
POR788
ELECTRONIC
CONTROL OVEN
POR783
PROGRAMMABLE
CONTROLLER
Safety cut-out feature
The oven automatically switches itself off if the temperature is
not adjusted or the appliance is left operating after a period
of time. The oven switches itself off after:
•20hourswhensetbetween30°Cand120°C
•8.5hourswhensetbetween120°Cand200°C
•5.5hourswhensetbetween200°Cand250°C
Using FHU (Fast Heat Up) mode
To quickly and efficiently preheat your oven, it is recommended
to select the “Fast Heat” cooking feature.
1. Ensure the appliance is on by pressing the “On / Off”.
The oven lights will light.
2. Select the desired oven function by pressing “Function”.
3.Setthecookingtemperaturebypressingthe–or+to
decrease or increase the temperature.



4. Press the “Fast Heat”. The letters “FHU” will appear on the
temperature display.
5. When the set temperature is reached the buzzer will
sound and the set temperature will be displayed.


Activating the child-proof lock
When the child lock is engaged, the oven cannot be
switched on.
1. Switch off the appliance using the “On / Off”.
2.Press“Function”and–atthesametime,holduntilthe
word “SAFE” is displayed.
The child-proof lock is now engaged.


Releasing the child-proof lock
1.Press“Function”and–atthesametime,holduntilthe
word “SAFE” is cleared from the display. The child-proof
lock is now released and the oven is ready to use.
Beep on touch
The beep sound can be activated anytime when a symbol is
pressed.
1. Ensure the oven is off by pressing “On / Off”.
2.Press“Function”and+simultaneouslyfor2seconds,a
single beep will sound to confirm the operation. Repeat
the above procedure to reset the beep on touch mode. As
default, the beep on touch mode is off.
Demo mode
This mode is intended to be used in retail shops to demonstrate
the oven functionality without any power consumption except
the oven lamps.
1. To activate this feature the appliance should be in stand-
by mode. (No function selected).
2.Pressandhold“FastHeat”and+for2seconds,the
appliance will beep once. When the appliance is initially
turned on the letter “d” will appear in the left hand corner
of the display to confirm that the appliance is in demo
mode. All functions can be selected, but the thermometer
iconwillnotash.Repeattheaboveprocedureto
deactivate the demo mode.
Your oven is equipped with a programmable controller that
can be used to turn on and off the oven automatically.
The cook time is used to automatically turn the oven off after
a set amount of time.
Setting the cook time
1. Select the desired oven function and cooking temperature.
2. Press the “cook time
” button as often as necessary, until
the desired cook time has been set.
3. After 8 seconds from the last time adjustment your oven
will be programmed and will start cooking.
Note:



Setting the start/stop time
The start/stop time can be used to switch the oven On and
Off at a specific time during the day.
1. Check the clock displays the correct time of day.
2. Select the desired oven function and cooking temperature.
3. Set the required cook time.
4. Press the “start/stop” time button to move the start and
stop time forward.
5. After 8 seconds from the last time adjustment the DELAY
SET icon will light and your oven is now programmed.
The oven will start cooking when the time of day reaches the
set start time.







On completion of cooking
When the cook time has elapsed, an audible signal
will sound for 10 seconds, the oven will switch off and
COOKINGFINISHEDwillbedisplayedonthelefthand
side of the display. On the right hand side of the display, the
remaining time indication “0 min” will appear together with
the cooking start and stop time.
•Tostoptheaudiblesignal,pressanyofthebuttonsonthe
control panel.
•Ifyouwishtocookabitlonger,pressthe“cooktime
button for each additional minute you require. The oven
automatically reverts to the function and temperature
previously programmed. This feature is available for 5
minutes after cooking has finished. After that, the oven
automatically switches off.
environmental tips
You can use the residual heat in the oven for keeping
food warm.
tips & information
Even though the heating element turns off the oven will still
retain substantial heat. This will continue to cook the food
untilitisremovedortheovencoolsdown.Ifyoudonotplan
on being present when the oven turns off, you should take this
extra heating time into account.
Setting the timer













Note:
•Thisfeaturehasnoeffectontheovenoperation.
Loading ...
Loading ...
Loading ...