Loading ...
Loading ...
Loading ...
3. PREPARE THE HOOD (CONT'D)
FOR VERTICAL DISCHARGE ONLY:
3.11 Turn the hood over and remove the metal shutoff plate from the
back of the hood, by removing its 3 retaining screws. Set the
screws aside.
3.12 Using a straight-blade screwdriver, remove the discharge knock-out. To ease removal, use a long nose pliers for
the third step. See figures below.
Never use a hammer and a screwdriver to punch out the discharge
knock-out, because this will damage the hood internal parts.
HRO067
O
HRO066
0
3.13 Using the 3 screws removed from 3.11, install the metal shutoff
plate on the back of the hood.
-8-
Loading ...
Loading ...
Loading ...