Loading ...
Loading ...
Loading ...
3. PREPARE THE HOOD (CONT'D)
FOR HORIZONTAL DISCHARGE ONLY (CONT'D):
3.7 Turn the hood over and remove the metal shutoff plate from the
back of the hood, by removing its 3 retaining screws. Set the
screws aside.
3.8 Using a straight-blade screwdriver, remove the discharge knock-out. To ease removal, use a long nose pliers for
the third step. See figures below.
Never use a hammer and a screwdriver to punch out the discharge
knock-out, because this will damage the hood internal parts.
O
HRO066
3.9 Press the metal shutoff plate on a flat surface to completely
flatten bent flange.
3.10 Using the 3 screws removed from 3.7, install the metal shutoff plate
on top of the hood.
-7-
Loading ...
Loading ...
Loading ...