Loading ...
Loading ...
Loading ...
7. REINSTALLBOTTOMPANEL
Ensure not to pinch the wires when reinstalling the bottom panel.
Remove protective plastic film covering filters before installing them.
7.1 Reinstall the bottom panel, using 9 screws saved
from steps 3.4 and 3.5, as shown beside.
NOTE: The left side panel will hide one screw.
7.2 Reconnect light assemblies. Reinstall side panels
using 4 screws saved from step 3.2.
7.3. Reinstall filters.
Do not reinstall the transport bracket.
HD0404
8. LIGHT BULBS
This range hood requires two 120 V, 50 W max., type MR16 with GU10 base, shielded halogen lamps (included).
cool beam, a dichro'fc lamp or lamp not suitable for use in recessed or enclosed luminaires.
In order to prevent the risk of personal injury, the halogen lamps must cool down before removing
them.
To replace bulbs:
1. Gently push upward and turn counterclockwise to
disengage used bulb leads from their grooves.
2. Place the new bulb leads into their grooves in the
socket.
3. Gently push upward and turn clockwise until
secured.
NOTE: If need be, use a rubber dishwashing glove to
add grip when removing the bulb.
1 3
-11 -
Loading ...
Loading ...
Loading ...