Loading ...
Loading ...
Loading ...
English - 17
DOOR REVERSAL
Depending on your requirements (installation location, space constraints), you can change the direction the
door opens.
This is done according to the customer’s needs. The qualifi ed technician or customer can do this
themselves directly.
1. Unplug the power cord.
2. Remove the two screws from the door-hinge.
3. Lift the door to separate it.
4. Remove the 16 screws.
Disassemble the air seal and remove the 6 screws (3 fl at
head screws at the top and 3 round head screws at the
bottom).
(Only for Crystal Gloss door models)
5. After removing the screw, rotate the Assy hinge door,
the handle door by 180° as shown in the fi gure.
•
Work carefully so that the door-seal is not removed.
6. Fasten the 16 screws in the correct positions.
Fasten the 6 screws and replace the air seal.
(Only for Crystal Gloss door models)
7. Note that two of the screws have a di erent length from the others.
(Use the longer screws for the door-lever.)
8. Move the position of the screw at the back of the door-hinge.
WARNING
CAUTION
INSTALLING YOUR DRYER
Frame-Front
Assy-Door
Hinge-Door
Crystal Gloss Door
Door-Glass
Assy hinge door
Handle Door
Crystal Gloss Door
DV90F5E6HGW-03297J-06_EN_150706.indd Sec3:17DV90F5E6HGW-03297J-06_EN_150706.indd Sec3:17 2015-07-06 1:07:542015-07-06 1:07:54
Loading ...
Loading ...
Loading ...