Loading ...
Loading ...
Loading ...
English - 12
ALCOVE OR CLOSET INSTALLATION
To operate safely and properly, your new Dryer requires minimum clearances of:
Sides – 25 mm Rear – 51 mm
Top – 25 mm Front – 470 mm
If both the washing machine and a dryer are installed together, the front of the alcove or closet must have at
least 465 mm unobstructed air opening.
ELECTRICAL REQUIREMENTS
Electrical Requirements is AC 220~240 V / 50 Hz.
• Improper connection of the equipment grounding conductor can result in a risk of electric shock.
Check with a qualifi ed electrician or serviceman if you are in doubt as to whether your dryer is
properly grounded. Do not modify the plug provided with your dryer – if it doesn’t fi t the outlet,
have a proper outlet installed by a qualifi ed electrician.
• To prevent unnecessary risk of fi re, electrical shock, or personal injury, all wiring and grounding
must be done in accordance with local codes, or in the absence of local codes, It is your
responsibility to provide adequate electrical services for your dryer.
GROUNDING
Your dryer must be grounded. If your dryer malfunctions or breaks down, grounding will reduce the risk of
electric shock by providing a path of least resistance for the electric current.
Your dryer comes with a power cord having a three-prong grounding plug for use in a properly installed and
grounded outlet.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result electrical shock.
Check with a qualifi ed electrician or serviceman if you are unsure if the dryer is properly grounded. Do
not modify the plug provided with the dryer. If it does not fi t the outlet, have a proper outlet installed by a
qualifi ed electrician.
If the product is not grounded, there is a danger of fi re or electric shock.
WARNING
WARNING
installing your dryer
DV90F5E6HGW-03297J-06_EN_150706.indd Sec3:12DV90F5E6HGW-03297J-06_EN_150706.indd Sec3:12 2015-07-06 1:07:532015-07-06 1:07:53
Loading ...
Loading ...
Loading ...