Loading ...
Loading ...
Loading ...
Oven
9E ING THE ClIILOGK
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The (_W) or (,Q) pad is used to set the clock. The clock may be set for 12 or 24 hour time of
day operation. The clock is preset at the factory for the 12 hour operation. When the wall
oven is first plugged in or when the power supply to the wall oven has been interrupted, the
display wiii flash with "PF" (power failure, See Figure 1).
When "PF" appears in the display, press @ or @. A beep will sound and "PF" will
CA_Y4S_L _NCEB
disappear.
To set the clock (example below for 1:30):
1. Press @ or @. "CLO" anf the current time of day wHi appear in the
display (Figure 2).
2. Press (_ (_ (_) pads to set the time of day to 1:30 <Figure 3>.
Press @. The time of day wHiappear in the dispiay (Figure 4).
8TA_T
Changing between 12 or 24 hour time of day display:
1. Pressandhond or(6}for6seconds<Figure31."CLO"andthe
current time of day wili appear in the dispiay (Figure 4). A beep wili
sound and "12h" (Figure 5) or "24h" (Figure 6) wili appear in the
display.
3. Press _ or @ to switch between the 12 and 24 hour time of
day
dispiay. The dispiay wili show either "12h" (Figure 5) or "24h" (Figure
6).
4. Press @ to accept the change or press @ or @ to reject the
change.
5. Reset the correct time as described in To set the Clock above.
Piease note that if the 24 hour time of day mode was chosen, the
chock wili now dispiay time from 0:00 through 23:59 hours.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
:i::ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:ii:
Loading ...
Loading ...
Loading ...