Loading ...
Loading ...
Loading ...
D-Link DSR-Series User Manual 309
Appendix D - Log Output Reference
Pattern added already DEBUG
ERROR: %s: Timeout at page %#0x
addr %#0x
ERROR
Error : All the %d pattern are in use. Cannot add a
new pattern , MAX_NUM_PATTERN
DEBUG Invalid IOCTL %#08x, cmd ERROR
Pattern added to entry %d ,i DEBUG
%s: unable to register device, dev-
>name
ERROR
Remove wake up pattern DEBUG ath_pci: 32-bit DMA not available ERROR
mask = %p pat = %p ,maskBytes,patternBytes DEBUG
ath_pci: cannot reserve PCI memory
region
ERROR
mask = %x pat = %x ,(u_int32_t)maskBytes,
(u_int32_t)patternBytes
DEBUG
ath_pci: cannot remap PCI memory
region) ;
ERROR
Pattern Removed from entry %d ,i DEBUG ath_pci: no memory for device state ERROR
Error : Pattern not found DEBUG
%s: unable to register device, dev-
>name
ERROR
PPM STATE ILLEGAL %x %x, forcePpmStateCur,
afp->forceState
DEBUG
ath_dev_probe: no memory for device
state
ERROR
FORCE_PPM %4d %6.6x %8.8x %8.8x %8.8x
%3.3x %4.4x,
DEBUG
%s: no memory for device state,
__func__
ERROR
failed to allocate tx descriptors: %d, error DEBUG kernel MIBCTL registration failed! ERROR
failed to allocate beacon descripotrs: %d, error DEBUG Bad ioctl command ERROR
failed to allocate UAPSD descripotrs: %d, error DEBUG WpsMod: Failed to congure gpio pin ERROR
hal qnum %u out of range, max %u!, DEBUG
WpsMod: Failed to register interrupt
handler
ERROR
HAL AC %u out of range, max %zu!, DEBUG registering char device failed ERROR
HAL AC %u out of range, max %zu!, DEBUG unregistering char device failed ERROR
%s: unable to update hardware queue %u!, DEBUG
%s:%d - ERROR: non-NULL node
pointer in %p, %p<%s>!
ERROR
Multicast Q: DEBUG
%s:%d - ERROR: non-NULL node
pointer in %p, %p<%s>!
ERROR
%p , buf DEBUG can’t alloc name %s, name ERROR
buf ags - 0x%08x --------- , buf->bf_ags DEBUG
%s: unable to register device, dev-
>name
ERROR
buf status - 0x%08x, buf->bf_status DEBUG
failed to automatically load module:
%s; \
ERROR
# frames in aggr - %d, length of aggregate - %d,
length of frame - %d, sequence number - %d,
tidno - %d,
DEBUG
Unable to load needed module: %s;
no support for \
ERROR
isdata: %d isaggr: %d isampdu: %d ht: %d
isretried: %d isxretried: %d shpreamble: %d isbar:
%d ispspoll: %d aggrburst: %d calcairtime: %d
qosnulleosp: %d,
DEBUG Module \%s\ is not known, buf ERROR
%p: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x
0x%08x 0x%08x 0x%08x 0x%08x 0x%08x,
DEBUG Error loading module \%s\, buf ERROR
0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x
0x%08x 0x%08x 0x%08x 0x%08x,
DEBUG Module \%s\ failed to initialize, buf ERROR
0x%08x 0x%08x 0x%08x 0x%08x, DEBUG ath_pci: 32-bit DMA not available ERROR
sc_txq[%d] : , i DEBUG
ath_pci: cannot reserve PCI memory
region
ERROR
tid %p pause %d : , tid, tid->paused DEBUG
ath_pci: cannot remap PCI memory
region) ;
ERROR
%d: %p , j, tid->tx_buf[j] DEBUG ath_pci: no memory for device state ERROR
%p , buf DEBUG
%s: unable to attach hardware: ‘%s’
(HAL status %u),
ERROR
axq_q: DEBUG %s: HAL ABI mismatch; ERROR
Loading ...
Loading ...
Loading ...