DSR-1000AC User Manual

Loading ...

D-Link DSR-Series User Manual 114

Section 7 - VPN

SSL VPN

SSL VPN Policies can be created on a Global, Group, or User level. User level policies take precedence over Group

level policies and Group level policies take precedence over Global policies. These policies can be applied to a

specic network resource, IP address, or IP ranges on the LAN, or to dierent SSL VPN services supported by the

router. The List of Available Policies can be ltered based on whether it applies to a user, group, or all users (global).

To add a SSL VPN policy, you must rst assign it to a user, group, or make it global (i.e., applicable to all SSL VPN

users). If the policy is for a group, the available congured groups are shown in a drop-down menu and one

must be selected. Similarly, for a user-dened policy, a SSL VPN user must be chosen from the available list of

congured users.

The next step is to dene the policy details. The policy name is a unique identier for this rule. The policy can

be assigned to a specic Network Resource (details follow in the subsequent section), IP address, IP network,

or all devices on the LAN of the router. Based on the selection of one of these four options, the appropriate

conguration elds are required (i.e., choosing the network resources from a list of dened resources, or dening

the IP addresses). For applying the policy to addresses the port range/port number can be dened.

The nal steps require the policy permission to be set to either permit or deny access to the selected addresses

or network resources. As well the policy can be specied for one or all of the supported SSL VPN services (i.e. VPN

tunnel).

Once dened, the policy goes into eect immediately. The policy name, SSL service it applies to, destination

(network resource or IP addresses), and permission (deny/permit) is outlined in a list of congured policies for

the router.

Note: You must enable Remote Management. Refer to “Remote Management” on page 189.

To create a new SSL VPN policy:

1. Make sure you have enabled remote management and have created user(s) and group(s) to assign to

this policy.

2. Click VPN > SSL VPN > SSL VPN Server Policy.

3. Click Add New SSL VPN Server Policy.

Server Policies

Loading ...

D-Link DSR-1000AC Wireless Ac Unified Services Vpn Router