Loading ...
Loading ...
Loading ...
D-Link DSR-Series User Manual 109
Section 7 - VPN
Client
Path: VPN > PPTP VPN > Client
PPTP VPN Client can be congured on this router. Using this client you can access remote network which is
local to PPTP server. Once client is enabled, the user can access Status > Active VPNs page and establish PPTP
VPN tunnel clicking Connect.
Field Description
Client Toggle to ON to enable PPTP client.
Server IP Enter the IP address of the PPTP server you want to connect to.
Remote Network Enter the remote network address. This address is local for the PPTP Server.
Remote Netmask Enter the remote network subnet mask.
Username Enter your PPTP user name.
Password Enter your PPTP password.
MPPE Encryption Toggle to ON to enable Microsoft Point-to-Point Encryption (MPPE).
Idle Time Out Enter the amount of time (in seconds) that you will disconnect from the PPTP server when idle.
Auto Dial Toggle to On to enable Auto Dial
Time Reconnect time
Save Click Save to save and activate your settings.
To congure the router as a PPTP VPN client:
1. Click VPN > PPTP VPN > Client tab.
2. Toggle Client to ON and complete the elds in the table below.
Note: When the PPTP Client conguration is correctly saved and the PPTP server is up, the tunnel initiation starts
automatically.
Loading ...
Loading ...
Loading ...