Loading ...
Loading ...
Loading ...
Step 4. Setting the Controls
Where you set your
desired humidity Ievels
depends on your personal
comfort level, outside
temperature and inside
temperature, A starting
Set point of 30%-40%
ROOM humidity is
recommended but there
may be conditions that
require a different setting.
Recommended
When Outdoor Indoor Relative
Temperature is: Humidity is:
-10°F -24°C 20%
2°F -18"C 25%
10°F -12°C 30%
> 20°F -6°C 35%
The chart provided offers general guidelines for selecting indoor humidity.
IMPORTANT: Water damage may result if condensation starts to form
on windows or walls, Humidity SET point should be lowered until
condensation no longer forms, We recommend room humidity levels
do not exceed 50%,
Operating the Controls
Digital Display
Press the power button once to turn
the unit on* _). Initially there is a slight
delay while the electronics calibrate.
Two bars (--) appear during this timer
Once calibration is complete a ROOM
humidity reading between 20% - 95%
will be displayed, A flashing 20 display
indicates that the room humidity is less
than 20%.
NOTE: The default settings at initial
startup are (LOW) F1 fan speed and
65% SET humidity, After desired settings
are selected by the user, they remain as
long as the unit remains plugged in and
there is no power interruption, If the unit
is unplugged the original default settings
are employed,
Function
Buttons
Digital Display
*Humidifier fan should operate at
initialstartup, If itdoes not, refer
to "Fan not operating (digital
display is illuminated)" in the
"Troubleshooting" section on
page 13 of this manual.
Loading ...
Loading ...
Loading ...