Loading ...
Loading ...
Loading ...
Attach Support Legs
1. Determine the correct slots on the tray side from the type of
exterior construction of the building.
Thin Wall Construction (vinyl, wood, etc.)
A
A.Firstand second slots
Thick Wall Construction (brick}
A
o
A. Second and third slots
2. Insert carriage bolt up through slot on tray-frame side and
support leg.
3. Place one end of tray center over carriage bolt.
4. Then place flat washer, lock washer and hex nut.
NOTE: Do not tighten. The leg must be able to move freely to
adjust angle when installed.
.......A
,,_s,, y,, C
......iii:ii:...........
A. Hex nut D. Tray center
B. Lock washer E.Carriage bolt
C. Flat washer
5=
Insert second carriage bolt through tray side and attach other
end of support leg.
NOTE: Do not tighten. The leg must be able to move freely to
adjust angle when installed.
......A
..........
_D
A. Hex nut C. Flat washer
B. Lock washer D. Carriage bolt
6. Install support leg on other side.
Install SMART-MOUNT _ Tray Assembly in Wall Opening
1. From inside, place SMART-MOUNT_tray, support legs facing
down, in the wall opening. Match the holes in tray side with
the predrilled holes in wall opening.
12
Loading ...
Loading ...
Loading ...