Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
The oven does not heat up. The necessary settings are not set. Make sure that the settings are cor‐
rect.
The oven does not heat up. The automatic switch-off is on. Refer to "Automatic switch-off".
The oven does not heat up. The Child Lock is on. Refer to "Using the Child Lock".
The oven does not heat up. The fuse is blown. Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
The lamp does not operate. The lamp is defective. Replace the lamp.
The food sensor does not operate. The plug of the food sensor is not
correctly installed into the socket.
Put the plug of the food sensor as
far as possible into the socket.
The display shows F111. The plug of the food sensor is not
correctly installed into the socket.
Put the plug of the food sensor as
far as possible into the socket.
The display shows an error code
that is not in this table.
There is an electrical fault.
• Turn off the oven with the house
fuse or the safety switch in the
fuse box and turn it on again.
• If the display shows the error
code again, contact the Custom‐
er Care Department.
Steam and condensation settle on
the food and in the cavity of the
oven.
You left the dish in the oven for too
long.
Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
The descaling procedure is interrup‐
ted before it finishes.
There was a power cut. Repeat the procedure.
The descaling procedure is interrup‐
ted before it finishes.
The function was stopped by the
user.
Repeat the procedure.
There is no water inside the grill- /
roasting pan after the descaling pro‐
cedure.
You did not fill the water drawer to
the maximum level.
Check if the a descaling agent / wa‐
ter is present in the water drawer
body.
Repeat the procedure.
There is dirty water on the bottom of
the cavity after the descaling cycle.
The grill- / roasting pan is on a
wrong shelf position.
Remove the residual water and the
descaling agent from the bottom of
the oven. Put the grill- / roasting pan
on the first shelf position.
The cleaning function is interrupted
before it finishes.
There was a power cut. Repeat the procedure.
The cleaning function is interrupted
before it finishes.
The function was stopped by the
user.
Repeat the procedure.
There is too much water on the bot‐
tom of the cavity after the end of the
cleaning function.
You sprayed too much detergent in
the appliance before the activation
of the cleaning cycle.
Cover all parts of the cavity with a
thin layer of the detergent. Spray the
detergent evenly.
There is no good performance of the
cleaning procedure.
The initial oven cavity temperature
of the steam cleaning function was
too high.
Repeat the cycle. Run the cycle
when the appliance is cold.
50 ENGLISH
Loading ...
Loading ...
Loading ...