Loading ...
Loading ...
Loading ...
Now that both top rack supports are flipped forward,
the top Three screws are all removed and the bottom
back panel screws are all loosened, you will now
slightly lift up and wing entire back wall panel
forward as wide open as possible
Look inside opening
and notice Infra-
Red Back Burner
Assembly
Infra-Red Burner Body
Mount Adapter
for Flare Orfice
Flex Hose
Igniter Wire
Now notice Flare Orifice, is bolted on
the inside of assembly
Flare Orifice
Fastener
Loosen Flare Orifice Fastener using wrench,
then remove with your hand, and remove
completley, be careful not to drop fastener.
Light Assembly Box
Slide Orfice and Flare
assembly out of gas
chamber, and pull
assembly up and out as
far as you can, for easier
handling
PAGE 8 OF 8
G.
H.
I.
J.
K.
24. Convert Back Infra-Red Burner
L.
Use Hand Drill, with #50
Drill Bit to Drill Orifice Hole
Out Larger for Natural Gas
Notice the small Pin Hole
Finish Gas Grill Conversion
Re-Assemble your grill following in the opposite direct section 15 A thru L. Be sure to properly secure any
screws and bolts back in blace, some pressure needs to be applied sometimes to insert screws back in. If
you have question during this conversion, please contact your local dealer.