Loading ...
Loading ...
Loading ...
Use Hand Drill to drill out each end hole to larger size. When drilling, be sure to only
press drill tip in no more than 1/4" Inch, or you may damage interior surface walls.
Do Not Drill This Valve
#50 Drill Bit
Hand Drill
Gas Manifold
Open Hole
Remove
Valve Bracket
Screw, and
unhinge valve
Replace
with new NG
Safety Valve
Secure new valve inplace, insert
valve base into Gas Manifold Hole
Secure Valve Bracket on,
But do not Tighten down
Flex Hose
Ignition Wires
13.
Turn Control Panel back upright, and insert back to grill body, now re-attache Flex
Line and Wires to Valve, also re-attach any other wires to other valve and Igniter Box.
Other Ignition Valve
Igniter Box
Be shure to Tighten this down.
Locate NG Regulator &
1/2" Flare Adapter
Remove current 3/8"
Flare from End of Gas
Pipe, and Replace
with New 1/2" Flare
fitting.
Connect NG Regulator
& make final connection
to your Gas Line Stub-Up
PAGE 5 OF 8
9.
10.
11.
12.
14.
15.
16.
Loading ...
Loading ...
Loading ...