Loading ...
Loading ...
Loading ...
Disasemble Valve Hose and Wires
While pulling out the Control Panel Assembly notice the Flex Hose attached to Center IR-Valve, use Plyers to
remove this from Valve Fitting. Also remove the Two Orange Ignition Wires from on top of the Valve. Try to
keep the wires on the right valve connected.
PAGE 4 OF 8
Turn Upright, so valves Orifice are facing upward. Some wires will have to be
removed, pay close attention to their positions, it may be a good idea to take a
photo of the inside of grill, before removing control panel, so you have a quick
reference when re-installing the control panel into the body of grill.
7.
Notice each Orifice Hole at tip of Valve, this is where you need to use Hand Drill,
with supplied #50 Drill Bit, to increase Hole size for Natural Gas.
8.
IR-Valve
Flex Hose
Ignition Wires
6.
#50 Drill Bit
Loading ...
Loading ...
Loading ...