Loading ...
Loading ...
Loading ...
Test for Gas Leaks
Mix some Soapy Water in a Bowl, use a Sponge to apply solution to these three areas illustrated. Afterward, turn gas
flow on, and see if you see any Bubbling, or Smell any Gas, also make sure all Valves are turned OFF. If either is the
case, tighten down all connections once more and test again untill there are Zero Gas Smells or Bubbling effects.
PAGE 6 OF 8
Apply Soapy Water Solution to these three areas
Re-Install Control Panel
Tighten down
Top & Bottom
Screws &
Insert Knob
Tighten Down
Valve Bracket
Screw Secure
Insert Drip Pan
19.
Install Left &
Right Screws
18.
Install Gas
Manifold Screw,
Connecting Pipe
to Grill Housing
Keep Screw Driver
Horizontal Alligned
Test Knob Turns 180 Degrees
and does not Rub Knob Ring
Knob
Ring
17.
20.
21.
22.
23.
GAS IN
CHECK ALL CONNECTIONS
Loading ...
Loading ...