Loading ...
Loading ...
Loading ...
[] INSPECTTOOLCORDSPERIODICALLY.Hfdamaged,
haverepairedbya qualifiedservicetechnicianat
anauthorizedservicefacility.Theconductorwith
insulationhavinganoutersurfacethatisgreenwith
orwithoutyellowstripesisthe equipment-ground-
ingconductor.Hfrepairor replacementof theelectric
cordorplugis necessary,donotconnecttheequip-
ment-groundingconductorto aliveterminal.Repair
orreplaceadamagedorworncordimmediately.Stay
constantlyawareofcordlocationandkeepit wellaway
fromtherotatingblade.
[] INSPECTEXTENSIONCORDSPERIODICALLYand
replaceif damaged.
[] POLARIZEDPLUGS.Toreducetheriskofelectric
shock,thistoolhasapolarizedplug(onebladeis
widerthantheother).Thisplugwilifit ina polarized
outletonlyoneway.If theplugdoesnotfit fullyinthe
outlet,reversetheplug.Ifit stilldoesnotfit, contacta
qualifiedelectricianto installtheproperoutlet.Donot
changetheplugin anyway.
[] KEEPTOOLDRY,CLEAN,ANDFREEFROMOIL
ANDGREASE.Alwaysusea cleanclothwhenclean-
ing.Neverusebrakefluids,gasoline,petroleum-based
products,oranysolventsto cleantool.
[] STAYALERTANDEXERCISECONTROL.Watch
whatyouaredoingandusecommonsense.Donot
operatetoolwhenyouaretired.Donotrush.
[] DONOTUSETOOLIFSWITCHDOESNOTTURNIT
ONANDOFF.Havedefectiveswitchesreplacedbyan
authorizedservicecenter.
[] USEONLYCORRECTBLADES.Donot useblades
withincorrectsizeholes.Neverusebladewashersor
bladeboltsthataredefectiveor incorrect.Themaxi-
mumbladecapacityofthesawis10in.
[] BEFOREMAKINGA CUT,BESUREALLADJUST-
MENTSARESECURE.
[] BESUREBLADEPATHiS FREEOFNAILS.Inspect
forandremoveallnailsfromlumberbeforecutting.
[] NEVERTOUCHBLADEorothermovingpartsduring
use.
[] NEVER STARTA TOOLWHEN ANY ROTATING COM-
PONENT IS IN CONTACT WITH THE WORKPII=CE.
[] DO NOT OPERATE A TOOL WHILE UNDER THE
INFLUENCE OF DRUGS, ALCOHOL, OR ANY
MEDICATION.
[] WHEN SERVICING use only identical replacement
parts. Use of any other parts may create a hazard or
cause product damage.
[] USE ONLY RECOMMENDED ACCESSORIES listed
in this manual or addendums. Use of accessories
that are not listed may cause the risk of personal
injury. Instructions for safe use of accessories are
included with the accessory.
[] DOUBLE CHECK ALL SETUPS. Make sure blade is
tight and not making contact with saw or workpiece
before connecting to power supply.
[] FIRMLY CLAMP OR BOLT the tool to a workbench or
table at approximately hip height.
[] KEEP HANDS AWAY FROM CUTTING AREA. Do not
reach underneath work or in blade cutting path with
your hands and fingers for any reason. Always turn the
power off.
[] ALWAYS SUPPORT LONG WORKPJECES while cut-
ting to minimize risk of blade pinching and kickback.
Saw may slip, walk, or slide while cutting long or heavy
boards.
[] ALWAYS USE A CLAMP to secure the workpiece
when possible.
[] BE SURE THE BLADE CLEARS THE WORKPIECE.
Never start the saw with the blade touching the
workpiece. Allow motor to come up to full speed
before starting cut.
[] MAKE SURE THE MITER TABLE AND SAW ARM
(BEVEL FUNCTION) ARE LOCKED IN POSITION
BEFORE OPERATING YOUR SAW. Lock the miter
table by securely tightening the miter lock tevers. Lock
the saw arm (bevel function) by securely tightening the
bevel lock knob.
[] NEVER USE A LENGTH STOP ON THE FREE SCRAP
END OF A CLAMPED WORKPIECE. NEVER hold
onto or bind the free scrap end of the workpiece in any
operation. If a work clamp and length stop are used
together, they must both be installed on the same side
of the saw table to prevent the saw from catching the
loose end and kicking up.
[] NEVER cut more than one piece at a time. DO NOT
STACK more than one workpiece on the saw table at a
time.
[] NEVER PERFORM ANY OPERATION FREEHAND.
Always place the workpiece to be cut on the miter
table and position it firmly against the fence as a back-
stop. Always use the fence.
Loading ...
Loading ...
Loading ...