Loading ...
Loading ...
Loading ...
9
English
EN
8 Apply silicone weather sealant (not included) around the mounting surface of the
floodlight unit and junction box for moisture seal. Installation is complete. Remove the
protective film from the camera.
9 Turn the electricity back on and allow the camera to power up. This can take up to a
minute.
When the camera starts blinking blue, it is ready to be paired with your Wi-Fi network.
10 Pair the camera and test for correct operation. From the SAFE by Swann app, select
Pair Camera > Swann Floodlight Camera and follow the on-screen instructions to
complete the camera setup.
TIP If you have a light switch that controls the floodlight unit, remember not to turn
off the switch as this will also turn off the camera. The camera needs to be powered
at all times to stay connected to your Wi-Fi. Put a sticker label on the light switch so
that people know not to turn it off.
For more details on using your Swann Floodlight security system such as live streaming,
activity recording and playback, and camera configuration including floodlight and siren
settings, see the SAFE by Swann manual which is available via the SAFE by Swann app
menu.
INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...