Loading ...
Loading ...
Loading ...
7
English
EN
INSTALLATION INSTRUCTIONS
IMPORTANT! TURN POWER OFF AT CIRCUIT BREAKER OR FUSE BOX.
When installing the unit refer to the Installation Example Diagram on page 6.
1 If you're replacing an old floodlight, disassemble it along with any existing mounting
bracket from your junction box and disconnect the wire connections.
CAUTION: Before handling any wiring, use a circuit tester to confirm that the power is
off.
2 Attach the provided mounting bracket to your junction box using the provided screws.
The side of the mounting bracket marked "GND" should be facing out.
3 Peel the backing off the adhesive foam gasket and stick it to the back of the floodlight
unit.
This unit is designed to be mounted on a standard wiring junction box and requires
connection to a 100-240VAC power supply. For optimum results, install the unit at least
2.4m (8ft) above the ground.
Read "IMPORTANT SAFETY INSTRUCTIONS" and "PREîINSTALLATION CHECK" and make
sure the installation site is Wi-Fi ready before installing the unit.
Loading ...
Loading ...
Loading ...