Loading ...
Loading ...
Loading ...
Troubleshooting
The oven will not The oven temperature is Allow the range to cool and then reset
self-clean, too high to start a self-clean the controls.
operation.
The oven controls have been
set incorrectly.
A self-cleaning cycle cannot
be started if the oven lockout
feature has been activated or
if a radiant surface element is
on,
Excessive smoking There is excessive soiling in
during a self- the oven.
cleaning cycle.
The oven door will The oven is too hot.
not open after a
self-cleaning cycle.
The oven is not The oven controls were not
clean after a self- set correctly.
cleaning cycle. The oven was heavily soiled.
Steam is coming
out of the vent.
When using the convection
feature, it is normal to see
steam coming out of the oven
vent.
As the number of racks or
amount of food being cooked
increases, the amount of
visible steam will increase.
A burning or oily This is normal in a new oven
odor is coming and will disappear in time.
from the vent.
See the section on self-cleaning on
page 59.
Release the oven lockout (see page
44). Make sure all surface elements
are turned off.
Press OVEN OFF. Open the windows to
rid the room of smoke. Wait until the
self-cleaning cycle is cancelled. Wipe
up the excessive soil and then start the
self-cleaning cycle again.
Allow the oven to cool.
See the section on self-cleaning on
page 59.
Wipe up heavy spillovers before
starting the self-cleaning cycle. Heavily
soiled ovens may need to be self-
cleaned again or for a longer period of
time.
This is not a system failure but normal
operation.
• To speed the process, set a self-
cleaning cycle for a minimum of
3 hours.
• See the section on self-cleaning on
page 59.
76 English
NE59J7850WS_AA_DG68-00600A-01_EN.indd 76 2015-04-23 _u10:32:11
Loading ...
Loading ...
Loading ...