Loading ...
Loading ...
Loading ...
8
is available, which illustrates this process:
https://www.youtube.com/watch?v=X4KYcFEfeY4
•
Check fuel line, tank, cap and fittings frequently for cracks or leaks. Replace if necessary.
•
Do not crank engine with spark plug removed.
•
Have the machine inspected annually by an authorized service dealer to ensure that all mechanical
and safety systems are working properly and have not worn excessively*. Failure to do so can result
in accidents, injuries or death.
*Please note that an annual inspection is not covered within the warranty program…only
REPAIR service.
CLEANING
1.
To clean your Snow Thrower, use a damp cloth and mild detergent on the surfaces only. Never get
soap or water inside the working mechanisms of your Snow Thrower.
Do not clean with water.
Water will freeze due to low temperature and damage the machine.
2.
Clean the Snow Thrower of snow and ice buildup before storing or transporting. Be sure to secure the
unit while transporting.
3.
Inspect the Snow Thrower carefully for worn, loose, or damaged parts. Check connections and
screws and tighten if necessary.
DO NOT MODIFY THE ENGINE
To avoid serious injury or death, do not modify engine in any way. Tampering with the governor setting
can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with factory setting
of engine governor.
KNOWING YOUR SNOW THROWER
Use the illustrations below to become familiar with the locations and functions of the various components
and controls of this snow thrower.
Loading ...
Loading ...
Loading ...