Loading ...
Loading ...
Loading ...
DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide
13
Installing PSU Modules into the PSU Module Slots
The Switch supports the installation of AC or DC PSU modules into the PSU module slots.
NOTE: The PSU modules support a specific airflow direction. This airflow direction must be the same as
the fan module(s) installed. The default airflow direction is front-to-back on all the installed PSU
modules and fan modules.
Installing AC PSU Modules
When an existing AC PSU module needs to be replaced or an additional AC PSU module needs to be installed, it is
important to know the proper installation of the AC PSU module. The AC PSU modules are hot-swappable and a
second PSU module can be inserted or removed while the Switch is powered on.
To remove an existing AC PSU module, remove the AC power cord and then press the release clip to the side. Gently
pull the AC PSU module out of the PSU module slot.
NOTE: Due to its mechanical design, the AC power cord needs to be removed before the release clip
can be pressed to the side. If the AC power cord is still plugged in, the release clip can't be pressed
to the side.
Insert the new AC PSU module into the PSU module slot until the release clip securely clicks into place.
Figure 3-8 Installing an AC PSU Module
Loading ...
Loading ...
Loading ...