Loading ...
Loading ...
Loading ...
www.factorybuysdirect.com
200253-01D26
ELECTRICAL
ELECTRICAL CONNECTION
FOR STOVES EQUIPPED WITH A BLOWER
Do not use this stove if any
part of it has been under water.
Immediately call a qualied ser-
vice technician to inspect the
stove and replace any part of
the electrical system which has
been under water.
GROUNDING INSTRUCTIONS
This stove is for use on 120 volts. The cord
has a plug as shown at A in Figure 34. An
adapter as shown at C is available for con-
necting three-blade grounding-type plugs to
two-slot receptacles. The green grounding
lug extending from the adapter must be
connected to a permanent ground such as
Grounding Pin
Grounding Means
Metal Screw
Cover of
Grounded
Outlet Box
A
B
C
Adapter
Figure 34 - Grounded Electrical Outlet
ELECTRICAL WIRING
Any electrical re-wiring of this stove must be
done by a qualied electrician. This wiring
must be done in accordance with local codes
and/or in Canada with the current CSA C22.1
Canadian Electrical Code, and for US instal-
lations, the National Electrical Code ANSI/
NFPA NO 70.
WARNING: If repairing or
replacing any electrical compo-
nent or wiring, the original wire
routing, color coding and secur-
ing locations must be followed.
a properly grounded outlet box. The adapter
should not be used if a three-slot grounded
receptacle is available.
(Sold
Separately)
CAUTION: Label all wires
prior to disconnection when
servicing controls. Wiring errors
can cause improper and danger-
ous operation.
Loading ...
Loading ...
Loading ...