Loading ...
Loading ...
Loading ...
getting to know your band saw
4
BEVEL LOCK KNOB
BLADE
GUIDES
SLOT
8
GLJ
LOCK KNOB
5 6
4 BLADE GUIDES
HANDWHEEL
/ ON-OFF SWITCH
3
t
ELECTRON_C/tNDICATOR
SYSTEM 7
BACK-UP BEARING
ARING
5 6
BLADE GUIDES
GETTING TO KNOW YOUR BAND SAW
I, Warning Labels
2 Tensions adiustment knob - Tightening the knob
will increase the tension on the blade Loosening
it will decrease the tension Clockwise to tension,
counter clockwise to loosen
3 Electronic Indicator System -Digitai readout for
blade tension, bevel angle and blade speed
(FPM)
4 Setting Bevel Angle - Pull the bevel _ock knob
and adjust the band saw to the desired angle by
turning the handwheel, then push in the bevel
lock to secure
5 Blade Guide Adjustment - The guides can be
adjusted in or out for various widths of blades
and locked in place by the set screws
6 Lateral Blade Guide Adiustment - The guides
can be adjusted sideways and locked in position
by the capscrews to prevent the blade from
twisting during operation
7 Blade Backup Bearing Adjustment - The thrust
bearings can be adjusted in or out for various
widths of blades and locked in place by the
setscrews
8 Guide Bar Lock Knob - The upper blade guides
should just clear the workpiece while cutting
Always adjust the guides before turning on the
band saw and lock the guide bar by tightening
the knob
16
Loading ...
Loading ...
Loading ...